How To Enable/Disable The Tv Display; Using And Adjusting Tv Out; How Tv Display Cannot Be Used - ATI Technologies 9200 - Radeon 128MB Video Graphics Card User Manual

The SCART connector supports only the Composite
video format, which means you will have to use a
S-Video-to-Composite video adapter cable if your
card only supports the S-Video connector.
If your European TV has S-Video In, you can use a
S-Video cable (available in most consumer electronic
stores) rather than the SCART connector if your card
only supports the S-Video connector.
A RADEON 9200 FSC Series with only a Composite
out connector DOES NOT support connection to
TVs with S-Video In.

How To Enable/Disable The TV Display

1
2
3
4
5

Using and Adjusting TV Out

For information about how to use TV display, right
click the ATI taskbar icon, point to Help, then point
to ATI Television Display.

How TV Display Cannot Be Used

A TV cannot be left connected to the card if two
analog monitors are connected, even if the TV is off
and not enabled in the software.
Access the Windows
click Display.
Click on the Settings tab and then the
Advanced... button.
Click on the ATI Displays tab. Click on the TV
button.
Click the enable/disable button.
Click OK or Apply to save the changes.
®
Control Panel. Double-
31