Table of Contents
Advertisement
2
GbE Pass-Thru Blade Installa-
tion
This chapter explains how to install this product into the chassis.
WARNING
CAUTION
2.1
Before Installing GbE Pass-Thru Blade
GbE Pass-Thru Blades can be installed/removed when the main power of the chassis is turned on. In
this case note the following points.
When the server blade connected to this product is operating, removing this product
will lose the LAN connection.
CAUTION
20
• Do not install unauthorized third party options. Doing so may cause device
failure, fire, or electric shock.
• Do not damage or modify internal cables or devices. Doing so may cause device
failure, fire, or electric shock.
• Before handling options, first touch a metal part of the chassis to discharge static
electricity.
• Do not touch the circuitry boards or soldered parts. Hold the brackets or the
edges of the circuit boards.
• If devices are installed or removed by methods other than those outlined in this
chapter or disassembled, the warranty will become invalid.
• When removing this product or a dummy switch blade, do not insert your hand
into the network blade slot. Doing so may cause electric shock.
• Before lifting the handle, make sure this product is inserted completely to the slot.
Advertisement
Chapters
Table of Contents
