3
Connect a LAN cable to the GbE Pass-Thru Blade.
Connect the LAN cable to the port whose number is the same as that of the server blade slot.
The numbers in the figure below correspond to the slot numbers of the server blade slot.
9/10
9
10
Regardless of the existence or non-existence of the server blade or power ON/OFF
status, hub/router link LED connecting to GbE Pass-Thru Blade turns on. During this
process, GbE Pass-Thru Blade LAN link LED may turn off.
7/8
5/6
3/4
7
5
3
8
6
4
1/2
1
2
2 GbE Pass-Thru Blade Installation
E
23