1. AUDIO OUT : RCA audio out terminal.
2. VIDEO IN : This receives images from cameras and sends them to monitors.
3. HDMI : Video output for high resolution monitor
4. LAN : This is the Gigabit Ethernet LAN cable connection terminal.
5. DC 12V : DC12V
6. SENSOR IN : This terminals can be connected to external sensors.
RELAY : This terminal blocks connect external electric devices to the product
(Warning Lamp and others).
RS485 : For control the pan and tile cameras. Make sure that the polarity.
7. VGA : video output for VGA display
8. AUDIO IN : RCA audio in terminals. You can record 4 channels at the same
time.
9. SPOT : SPOT terminals.
Only for 16ch
8. AUDIO IN (1~8, 9~16) : RCA audio in terminals.
9. SPOT : SPOT terminals.
10. USB : USB port is for mouse and USB devices. You should
connect correctly the USB devices and mouse as picture directed
For more details, refer to [CH 2. Installation Method and Cautions].
11
CH 1 Product Introduction