To adjust the noise gate settings for a channel:
1
On the appliance Web UI's main page, select DSP.
2
Select the
Menu
3
From the drop-down menu, select
Note: If you want to return to the factory settings, select the
the right corner.
4
Adjust the following settings as needed:
Enable
Threshold
Figure 15. Noise Gate Settings
button for the channel.
Noise
Table 15. Noise Gate Settings
Enables or disables the noise gate DSP effect for this chan-
nel.
Sets the minimum threshold level that the signal must
reach for the noise gate to "open," allowing the signal to
be sent to the output channel.
Threshold range is -135 to +21 dB.
Gate.
Reset
icon that appears in
34