York YK Installation Manual page 4

In complying with Johnson Controls' policy for con-
tinuous product improvement, the information con-
tained in this document is subject to change without
notice. Johnson Controls makes no commitment to
update or provide current information automatically
to the manual or product owner. Updated manuals, if
applicable, can be obtained by contacting the nearest
Johnson Controls Service office or accessing the John-
son Controls Knowledge Exchange website at
docs.johnsoncontrols.com/chillers/.
Revisions made to this document are indicated in the following table. These revisions are to technical information,
and any other changes in spelling, grammar, or formatting are not included.
Affected pages
4 Associated literature table updated
11 Note 6 corrected
11–12 References corrected
12 Note 13 and 15 updated with FLA information
24 Control wiring section corrected to include R24
26 Oil pump connections figure updated
26–27 Tables for control and oil pump wire numbers and termination points added
MVVSD - Safety Instructions
MVVSD - Operation
MVVSD - Service
MVVSD - Renewal Parts
MVVSD - Wiring
4
Changeability of this document
https://
Revision notes
Associated literature
Manual description
It is the responsibility of rigging, lifting, and operating/
service personnel to verify the applicability of these
documents to the equipment. If there is any question
regarding the applicability of these documents, rig-
ging, lifting, and operating/service personnel should
verify whether the equipment has been modified and
if current literature is available from the owner of the
equipment prior to performing any work on the chiller.
Description
Form 160.00-N6
Issue date: 08/27/2021
Form number
160.00-S1
160.00-O6
160.00-M6
160.00-RP6
160.75-PW6
JOHNSON CONTROLS