American Dynamics SpeedDome Ultra VII RAS917LS Configuration page 81

AD168
Supported Protocols
Maximum Presets
(5)
Maximum Patterns
Quick Set Menu
Address Range
Notes:
(1) Requires the appropriate code control module.
(2) Requires the AD2083-02 series code converter.
(3) Presets information is stored at the converter or control
module, not the dome.
(4) Requires AD2083-02 with firmware version 0701-11YB-
156A or newer. Preset information is stored in the
dome, not the converter.
(5) Patterns are limited by time and the number of available
dome commands. Total time for each pattern cannot
exceed 6 minutes 50 seconds. Total dome commands
used in all patterns cannot exceed 99.
(6) Requires additional equipment to achieve these
numbers. A dome address within each group of 64 or 99
cameras is reserved as a global broadcast address.
AD2050
Supported Protocol
Maximum Presets
(4)
Maximum Patterns
Quick Set Menu
Address Range
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Requires AD2083-02 with firmware version 0701-11YB-
156A or newer. Preset information is stored in the
dome, not the converter.
(4) Patterns are limited by time and the number of available
dome commands. Total time for each pattern cannot
exceed 6 minutes 50 seconds. Total dome commands
used in all patterns cannot exceed 99.
(5) Requires additional equipment to achieve these
numbers. A dome address within each group of 64 or 99
cameras is reserved as a global broadcast address.
SensorNet and RS-422 Command Summary
(1)
SensorNet
(1) or (2)
RS-422
(1)(2) (1)(3) (4)
16 , 64 , or 60
3
Not supported
SensorNet: 1-180
(1)(6)
RS-422: 1-99 or
(2)(6)
1-180
(1)
RS-422
(2)
16 or
(3)
60
3
Not supported
(5)
1-1024
MegaPower LT
Supported Protocol
Maximum Presets
(1)
Maximum Patterns
Quick Set Menu
Address Range
Notes:
(1) Patterns are limited by time and the number of available
dome commands. Total time for each pattern cannot
exceed 6 minutes 50 seconds. Total dome commands
used in all patterns cannot exceed 99.
(2) Requires a compatible keyboard.
MegaPower 48
Supported Protocols
Maximum Presets
(2)
Maximum Patterns
Quick Set Menu
Address Range
Notes:
(1) Preset information is stored at the host, not the dome.
(2) Patterns are limited by time and the number of available
dome commands. Total time for each pattern cannot
exceed 6 minutes 50 seconds. Total dome commands
used in all patterns cannot exceed 99.
(3) Requires firmware 1.07 or newer and a compatible
keyboard.
MegaPower 1024
Supported Protocol
Maximum Presets
(4)
Maximum Patterns
Quick Set Menu
Address Range
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Requires AD2083-02 with firmware version 0701-11YB-
156A or newer. Preset information is stored in the
dome, not the converter.
(4) Patterns are limited by time and the number of available
dome commands. Total time for each pattern cannot
exceed 6 minutes 50 seconds. Total dome commands
used in all patterns cannot exceed 99.
(5) Requires additional equipment to achieve these
numbers. A dome address within each group of 64 or 99
cameras is reserved as a global broadcast address.
SensorNet
96
3
(2)
Yes
1-32
SensorNet
RS-422
(1)
96
3
(3)
Yes
1-48
(1)
RS-422
(2)
16 or
(3)
60
3
Not supported
(5)
1-1024
A-5