Table of Contents
Advertisement
6
7
8
9
10
11
Appendices
With two people lifting on each side of the printer, hold the printer
over the base with the two round pegs on the printer aligned with the
round holes on the front of the base, and the two square pegs on the
printer aligned with the square holes on the back of the base.
Lower the bottom of the printer onto the base until it settles in place.
Check the locks on both sides of the base and make sure that they are
locked in the forward position. If the locks are in the back position,
move them forward.
With two people lifting on either side of the printer, return it to its
original location.
Load the empty cassette with paper. (
Set the paper cover on the optional cassette.
37)
141
Advertisement
Table of Contents
Troubleshooting
