Troubleshooting - Electrolux GWH 11 NanoPlus EU User Manual

10 www.home-comfort.com

Troubleshooting

No flame
Low water temperature
During the operation of
the water heater, flame
goes out
If there is any failure, please make contact with the corresponding technical service department
or an installer!
Different types of gases as
fuel
Air in the gas feeding
The battery is null or placed
in wrong direction
No hot water
The gas valve is not
completely on
The exhaust system is
blocked
When the water pressure is
too low, the rectifier of water
pressure will be disconnected
from the water heater
Open the gas valve
For connection with use of butane:
Check the gas cylinder, if
necessary, please replace it with a
new one.
Close and open the distributor for
several times
Please check the polarity of the
batteries, if neces- sary, please
replace them with new ones.
Open the distributor of hot water
Open the gas valve completely
Check whether the exhaust pipe is
fluent or not
Reduce some energy and check
the connecting state of water