Cleaning And Care; Emptying The Dust Container - Beko VCO 6325 AB User Manual

3 Usage
3.10 Switching off the
vacuum cleaner and parking
feature
1. Switch off the appliance with the on/off button
(1) and unplug it.
2. Insert the parking hook (7) of the parquet/
carpet brush into the parking groove located at
the rear section of the appliance.
4

Cleaning and care

Switch off and unplug the appliance before
cleaning it.
WARNING: Never use gasoline,
A
solvent, abrasive cleaning agents,
metal objects or hard brushes to
clean the appliance.
4.1 Emptying the dust
container
1. Press the dust container removal button (6) to
remove the dust container (2) and remove the
dust container in the direction of the arrow
by holding from the dust container carrying
handle.
2. Uncap the dust container (2) and empty it.
3. When you have emptied dust, close the dust
container cap (2); a click sound will be heard.
8 / 23 EN
4. Insert the dust container (2) into its place by
holding it from the handle.
4.2 Cleaning the filters
A
WARNING: Do not use appliances
producing hot air such as hair dryer
or heater to dry the filters.
WARNING: Do not install the
filters without completely drying
A
them; otherwise, smell of moisture
may occur during use, water can
leak from the back of the appliance
or the filters may get damaged.
A
WARNING: Attach the filters into
their places after they are dried.
4.2.1 Motor protection filter and
HEPA filter
This filters are located under the dust container
(2) compartment.
1. Press the dust container removal button (6) and
remove the dust container (2).
Vacuum Cleaner / User manual