Advertisement
If you have connected the BJC-620 to your computer and have turned it on, but your
computer says it cannot find the printer, you may need to modify your BIOS setup.
This section describes the BIOS setups for several computer configurations. Our on-
line services are updated with this type of information as it becomes available. If you
are having a unique problem and do not see your computer here, be sure to use our
on-line services (Web, BBS, CompuServe). See Getting Help From Canon in Chapter
1 (page 1-3) for details.
%,26
Press CTRL ALT ESC
Use Arrow Key to Go to Advanced
Select Peripheral Configuration
Cursor to Parallel Port Mode
Press Enter
Select ECP
Press FlO to Save and Exit
Hit F2 to Enter Setup
Hit up Arrow Key to Go to Advanced
Cursor Down to Integrated Peripherals
Cursor Down to Parallel Port Mode
Use Gray Plus Key to Select ECP
Press Escape Twice
Cursor Over to Exit
Select Save Changes and Exit
7URXEOHVKRRWLQJ
Chapter 5
Advertisement
