Advertisement
*HQHUDO 3UREOHPV
,QLWLDOL]DWLRQ (UURU
7XUQ RII
WKH SULQWHU
7URXEOHVKRRWLQJ
The most basic problems you may encounter are "the printer does not
print" and "your print quality is not satisfactory."
,I WKH SULQWHU GRHV QRW SULQW
Check all your cable connections
Check your Microsoft Windows Printing System setup
Check your computer configuration
,I \RXU SULQW TXDOLW\ LV QRW VDWLVIDFWRU\
Clean the print head unit
Clean the print head unit five times
Replace the ink tanks
The first time you turn on the printer, it performs an initialization
process and flushes the print head unit to make sure the nozzles are
clear. This takes approximately three minutes. It is done only once - the
first time you turn on the printer.
As the printer flushes the print head unit, various lights flash and then
stay on. These lights indicate where the printer is in the cleaning
process.
If a print head unit error occurs when you turn in the printer, the orange
ERROR light and one or more PRINT MODE lights flash. Follow
these steps:
Press the POWER button to turn off the printer.
Unplug the printer.
Wait ten seconds and then reattach the power cord.
Remove the ink tanks.
Chapter 5
Advertisement
