Motorola M68ICS08RK User Manual page 16

1.3 RKICS Components
1.3.1 M68ICS08RK Hardware
M68ICS08RK In-Circuit Simulator — Rev. 1
MOTOROLA
The complete RKICS system includes hardware, software, and documentation.
Table 1-1 lists the RKICS product components.
Table 1-1. M68ICS08RK Product Components
Part Number
ICS08RK RKICS software development package
MC68HC908RK2 MCU
M68ICS08RK2 RKICS board
Ribbon target cable
Serial cable
Power supply
MON08 cable
Table 1-2 lists the RKICS hardware components.
Table 1-2. Hardware Components
Components
Test sockets for the Motorola MC68HC908RK2 MCU:
XU1
XU2
XU3
User-selectable 2.0-volt to 3.3-volt variable voltage level shifter
J4
(V
P2 RS-232 to interface the RKICS to the host serial connector
One 2-row × 10-pin, 0.3-inch spacing dual in-line package
J3 (DIP) socket to allow the RKICS to be connected to the target
using a ribbon cable
One 2-row × 20-pin, 0.1-inch spacing connector to connect the
J1
RKICS to a target using an optional M68CLB05A flex cable
One 2-row × 8-pin, 0.1-inch spacing connector to connect to a
J2
remote target via the MON08 debug circuit
Introduction
Description
Description
20-pin SSOP (small shrink outline package)
20-pin SOIC (small outline integrated circuit)
32-pin QFP (quad flat pack)
)
DD
Introduction
RKICS Components
User's Manual
15