Table of Contents
Advertisement
Introduction
User's Manual
14
The RKICS and the RKICS software form a complete editor, assembler,
programmer, simulator, and limited real-time I/O (input/output) emulator for
the MC68HC908RK2 MCUs. When the RKICS is connected to a host PC
(personal computer) and target hardware, the actual inputs and outputs of the
target system can be used during simulation of code.
Depending on the software, the uses of the RKICS development package are:
•
The WINIDE and CASM08Z software may be used as editor and
assembler.
•
With ICS08RKZ, the RKICS is used as a simulator.
•
With the PROG08SZ software, the RKICS is used to program MCU
FLASH memory.
•
With the ICD08SZ software, the RKICS is used as a limited real-time
emulator.
The RKICS connects to the target machine via the provided 20-pin ribbon cable
or an optional Motorola M68CLB05A flex cable (available separately). It
connects to the software host via a single RS-232 connection and a standard
DB-9 serial cable.
Use the RKICS with any IBM
version) with a serial port.
Introduction
®
®
Windows 95
-based computer (or later
M68ICS08RK In-Circuit Simulator — Rev. 1
MOTOROLA
Advertisement
Table of Contents
