Introducing The Om-Net-1608; Ethernet Interface - Omega OM-NET-1608 User Manual

Introducing the OM-NET-1608

The OM-NET-1608 is compatible with both TCP/IP (IPv4 only) and user datagram protocol (UDP) network
protocols.
The OM-NET-1608 provides the following features:

Four differential (DIFF) or eight single-ended (SE) analog input channels (16-bit)

Sample rates up to 250 kS/s aggregate

Two analog output channels (16-bit)

Eight individually-configurable digital I/O channels

One counter channel (32-bit) that counts TTL pulses

Screw terminals for field wiring connections
The OM-NET-1608 is powered by a 5 volt power adapter.

Ethernet interface

The OM-NET-1608 has one built-in 10/100 BASE-T auto-negotiation, high-speed communication port.
With the Ethernet interface, you can remotely access and configure your OM-NET-1608 from anywhere on the
network. Only one computer can control the OM-NET-1608 at one time. The networking protocols are TCP/IP
and UDP.
A unique media access control (MAC) address is assigned to each device at the factory.
You configure the Ethernet connection settings through software. A network name in the format
xxxxxx
, is assigned to the OM-NET-1608, where
MAC address.
xxxxxx
represents the lower six characters of the device
6
Chapter 1
E-1608-