Section 4: Options & Accessories; Tire Options - Land Pride RC2512 Operator's Manual

Section 4: Options & Accessories
Section 4: Options & Accessories
Hydraulic Wing Control Kit
330-760K RC2512 DUAL REMOTE HYDRAULIC KIT
Refer to Figure 4-1:
Land Pride offers a Hydraulic Wing Control Kit for
controlling the wing folding cylinders independently from
the lift cylinder.
IMPORTANT: Never operate a cutter under any
terrain conditions where, on a continuous cut, the
wing angle exceeds 45 degrees up. Damage to the
wing driveline and gearboxes can occur. Raise wing
only enough to clear obstacles and then lower the
wing immediately after.
Follow all safety precautions in this manual
especially information regarding raising the wings up
with PTO running.
This kit consist of one new tee fitting, one new hydraulic
hose, one new quick disconnect coupling and one new
cylinder port plug. Existing hoses and fittings are used in
conjunction with the kit to complete the necessary
requirements to control the wing folding cylinders
independently from the lift cylinder.

Tire Options

Land Pride offers six tire/wheel options to best suit your
application:
•
Laminated tires are constructed of laminated layers of
solid rubber that will never go flat.
•
Aircraft tires are built tough to withstand the rugged
use a cutter receives and to provide a smoother ride
when transporting from field to field.
Part Number & Description
814-265C TIRE & WHEEL LAMINATED. 6 x 9 x 21 (5-BOLT)
814-394C AIR CRAFT TIRE 20.5 x 6.75-10 2PC (5-BOLT)
3/27/15
Table of Contents
Hydraulic Wing Control Kit
Figure 4-1
RC2512 Rotary Cutter 330-725M
30627
23