Using This Manual; Owner Assistance - Land Pride RC2512 Operator's Manual

Introduction
Introduction
Land Pride welcomes you to the growing family of new
product owners.
This Rotary Cutter has been designed with care and built
by skilled workers using quality materials. Proper
assembly, maintenance, and safe operating practices will
help you get years of satisfactory use from this machine.
Application
The RC2512 Series Rotary Cutters are designed and
built by Land Pride to provide excellent cutting
performance on gently sloping or slightly contoured
pastures and set-aside-acres. The 12' cutting width,
1 1/2" to 12" cutting height and ability to cut weeds and
brush up to 1 1/2" in diameter make it well suited for
these applications. This model features a pull-type self-
leveling clevis hitch for attachment to 40-75 HP tractors
and 540 rpm Cat. 4 CV main input driveline. It is an
excellent choice for light agricultural, and municipal
mowing applications.
See "Specifications & Capacities" on page 36 and
"Features & Benefits" on page 38 for additional
information and performance enhancing accessories.

Using This Manual

•
This Operator's Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator's or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com.
•
Store this manual in the dry storage tube located on top
of the splitter guard.
Terminology
"Right" or "Left" as used in this manual is determined by
facing forward in the direction the machine will operate
while in use unless otherwise stated.
Definitions
IMPORTANT: A special point of information related
to the following topic. Land Pride's intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.

Owner Assistance

The Online Warranty Registration should be completed
by the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
3/27/15
Table of Contents
The parts on your Rotary Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
Model No. _____________Serial No. _______________
For quick reference and prompt service, record model
number and serial number in the spaces provided above
and again on warranty page 41. Always provide model
number and serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for location of your serial number plate.
Further Assistance
Your dealer wants you to be satisfied with your new
cutter. If for any reason you do not understand any part of
this manual or are not satisfied with the service received,
the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure that person is aware of any
problems you may have and has had the opportunity
to assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Serial Number Plate Location
Figure 1
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
RC2512 Rotary Cutter 330-725M
30926
9