Canon BJC 3000 Reference Manual page 92

Preparing and Executing a Print job
Before you start a print job, you need to specify the print settings. The print settings in the
printer driver allow fine control over the print quality and colour adjustment, but you can sim-
plify the setup procedure as follows.
Windows
1
Set the paper size you use from within the application program before print-
ing.
2
Select the command used for printing (e.g., "Print" or "Print Setup" in the
File menu) in the application program.
3
Click the Properties button to open the Printer Properties dialogue box,
then select the desired icon (i.e., print mode) in the Choose Print Mode box
under the Main tab.
• The most appropriate print settings are pre-registered in each icon for a
particular type of print job.
• The BJ Cartridge and Media Type settings are selected automatically.
4
Make sure that the BJ Cartridge and Media Type settings match the BJ
Cartridge and print media you use for printing. (Change the settings, as
needed.)
Setting the Printer Driver 92