Speaker Setting - Aiwa HT-DV90 Operating Instructions Manual

SURROUND PLAYBACK MODE INDICATION
The " h DIGITAL", "dts" and " h PRO LOGIC" indicators show
your present playback condition as follows;
"h DIGITAL" indicator lights up...
when a Dolby Digital source is played back.
"dts" indicator lights up...
when a DTS source is played back.
"h PRO LOGIC" indicator lights up...
when a 2-channel source, such as the following, is played back
with PRO LOGIC mode:
• Dolby Pro Logic source (such as a video cassette recorded in
Pro Logic played back on a connected VCR player)
• 2-channel Dolby Digital source (DVD etc.,)
If the source does not play in your desired
playback mode
Your actual surround playback condition is determined by a
number of factors. Check the following;
– type of signal and number of channels on your source
For example, a Dolby Digital or a DTS disc may come in
its full 5.1 channels, or in 2 channels, etc. Press ON
SCREEN on the remote control to check the audio signal
type information.
See "ON SCREEN DISPLA Y INFORMATION", page 23.
– selected track
Your disc may of fer a choice among several types of sound
mixes. Check that your desired mix is selected with the
AUDIO button on the remote control.
See "CHANGING AUDIO TRACKS", page 22.
– type of connection
If you are using analog connection, Dolby Digital or DTS
playback is disabled.

SPEAKER SETTING

NOTE
• When the remote control is VIDEO 1, VIDEO 2,
SAT. mode, press i,k,jor l with pressing SHIFT.
SETTING UP THE SPEAKER SIZE
You can set each speaker size and whether they are present or
not.
1 Press SHIFT+SP SETUP.
2 Press i or k to select "SP SIZE".
With each press:
SP SIZE SP DIST
3 Press l .
4 Press i or k to select the speaker for setting.
With each press:
FRONT CENTER
5 Press l .
6 Press i or k to select the speaker type.
With each press:
FRONT: F-LARGE
CENTER: C-LARGE
SURROUND:S-LARGE
SW: SW-YES
LARGE: Large speaker . When bass playback is possible. (100
Hz or lower is the target.)
SMALL: Small speaker . When bass playback is not possible.
NONE: When not using the center or the surround speakers.
YES: When using a subwoofer .
NO: When not using a subwoofer .
(Default: F-SMALL, C-SMALL, S-SMALL, SW -YES)
7 Press l.
"ENTER" flashes. Then the selected item is displayed. If you
set other speaker , press l to go back to step 4.
When the setting is not changed, the unit goes back to step
4.
TV or CABLE/
BALANCE TEST TONE
SURROUND SW
F-SMALL
C-SMALL C-NONE
S-SMALL S-NONE
SW-NO
25
ENGLISH
En