Connections Of The Mega Macs 56 - Hella Gutmann mega macs 56 Quick Start Manual

Product Description

Connections of the mega macs 56

3.6 Connections of the mega macs 56
D D e e s s i i g g n n a a t t i i o o n n
1 USB device interface
Use the USB device interface for data exchange between the PC and the device.
2 USB host interfaces
2
Connect external tools such as a printer or the DT VCI with the USB host interfaces (USB
interfaces for short).
Power supply socket
3
Power supply of the device and battery charge connection.
4 ON/OFF button
Switch the device on and off.
5 Measurement module MT 56
The module contains a 2-channel oscilloscope for the following measured variables:
• Voltage
• Current (with current clamp)
• Resistance
6 Oscilloscope 1 connections
Connect a test lead to Scope 1.
• blue = signal
• black = ground
7 ST3 connection
Connect a current clamp here.
8 Oscilloscope 2 connections
Connect a test lead to Scope 2.
• red = signal
• black = ground
9 Additional module slot
Spare slot. Another module can be inserted here.
Internal: 1x WLAN, 1x Bluetooth
All wireless connections are integrated in the device and are permanently switched on.
mega macs 56
EN
33