Advertisement
Quick Links
31.5"x 15.7" Electric Desk Riser
Instruction Manual
SKU: DESK-V001KE
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-v001ke
help@vivo-us.com
www.vivo-us.com
1-800-371-5654
Advertisement
Related Manuals for Vivo DESK-V001KE
Summary of Contents for Vivo DESK-V001KE
- Page 1 31.5”x 15.7” Electric Desk Riser Instruction Manual SKU: DESK-V001KE Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v001ke help@vivo-us.com www.vivo-us.com 1-800-371-5654...
- Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
-
Page 3: Assembly Steps
ASSEMBLY STEPS STEP 1 Carefully remove desk (A) from packaging and cut cable tie from underneath. STEP 2 Plug the power cord into a wall outlet and hold the UP button to fully raise the desk. - Page 4 STEP 3 Mount keyboard tray (B) to desk using screws (D). Tighten with screwdriver (G). STEP 4 If using a grommet mounted monitor desk stand, remove the plastic cap from the desktop and secure the stand to the hole.
- Page 5 STEP 5 Apply adhesive cable clips (C) to underside of desk to further organize cables. STEP 6 Place keyboard, mouse and other items on the desk. Use clips on desk to organize cables. STEP 7 Use cable ties (E) to further organize cables.
- Page 6 STEP 8 Use the UP and DOWN buttons to operate the desk. STEP 9 If the keyboard tray doesn't sit flat on the tabletop when completely lowered, apply additional pads (F) on the keyboard tray's pre-installed pads.
- Page 7 CAUTION! Keep monitor and Follow the cable laptop base fully on routing instructions to the desktop. avoid the potential to pinch cables. Leave enough slack Raise desktop in cable to allow for slowly to keep full range of vertical items stable. motion (15”...
- Page 8 Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
Need help?
Do you have a question about the DESK-V001KE and is the answer not in the manual?
Questions and answers