10
Maintenance
2. CLEANING AWAY DEPOSITS:
- Thoroughly wash and clean all the valve parts before disassembly;
- Pay attention to any possible detergent or other aggressive fluid
deposits (see "Cleaning");
- Always use protective safety glasses and gloves when required.
CAUTION!
Hand crushing hazard. During operation there is a crushing hazard
caused by the washing pin or the guide pin (when present).
Never put hands in the valve openings.
3. REPLACEMENT OF WORN VALVE PARTS:
Always use original spare parts
10.2
Scheduled maintenance
SCHEDULED MAINTENANCE
VALVE GASKETS
ACTUATOR GASKETS
Preventive
Replace after 12 months
Replace after 24 months
In the event of leaks
Replace at the end of the day
Replace in the event of leaks
Check correct operation and
Check correct operation and
that there are no leaks
that there are no leaks
Periodical
Record the actions carried out
Record the actions carried out
22
EN-IST-B925-0621