Product Compliance; Safety; Emc - PEAK COMMUNICATIONS TLTR3100 Installation And Operating Handbook

Installation and Operating Handbook

Product Compliance

Safety

To ensure safety of the operator the TLTR3100 series of units have been designed to comply with the following
safety standard;
EN 60950: Safety of information technology equipment, including electrical business machines.
Operation of the equipment in a non standard manner will invalidate compliance to this standard. The
equipment MUST BE OPERATED WITH ITS LID ON AT ALL TIMES. If it is necessary to remove the lid for any
purpose then it is essential that the lid is fitted back correctly before normal operation.
DEPENDANT UPON UNIT TYPE, DANGEROUS VOLTAGES MAY BE PRESENT AROUND THE POWER
THE EQUIPMENT IS MEANT TO BE OPERATED BY TRAINED PERSONNEL ONLY.

EMC

The TLTR3100 units have been designed to comply with the following standards;
Emissions
EN 55022 Class B: Limits and methods of measurement of radio interference characteristics of Information
Technology Equipment.
Immunity
EN 50082 Part 1: Generic immunity standard, part 1: Domestic, commercial and light industrial environ­
ment.
Damage to the chassis, controls or interfaces will invalidate compliance; please contact the factory under
these circumstances for advice on continued operation. Interfaces to the TLTR3100 series of units must be
made with suitably screened connectors and double screened coaxial cable. Data cables must be double
screened.
TLTR3100
SUPPLY AND PRECAUTIONS MUST BE TAKEN.
Peak Communications Ltd. vii