Upgrading Main Memory - Fujitsu Siemens D1160 Additional Technical Manual

Upgrading main memory

These slots are suitable for 64 to 512 Mbyte RDRAM memory modules of the RIMM format. The
permissible total size of the main memory is 1 Gbyte.
Memory modules with different memory capacities can be combined.
All locations must always be occupied. Missing memory modules must be replaced with
!
a C-RIMM module. This C-RIMM module must then be installed in the order of the
locations behind the RIMM memory module:
Location bank 0 = RIMM memory module
Location bank 1 = C-RIMM memory module
The system board supports a maximum of 32 RDRAM modules at all locations for the main memory
combined:
Technology
64 Mbit
128 Mbit
256 Mbit
You may only use 2.5 V RIMM memory modules.
!
The system board supports memory modules of the speed classes PC600, PC700 and
PC800. Always use memory modules of the same speed class. Otherwise the memory
speed is limited to the slowest speed class. Optimal system speed is achieved when you
use PC800 RDRAM memory modules.
A26361-D1160-Z180-5-7619
Total size of RIMM module
64 Mbyte
96 Mbyte
128 Mbyte
64 Mbyte
128 Mbyte
192 Mbyte
256 Mbyte
128 Mbyte
256 Mbyte
384 Mbyte
512 Mbyte
Upgrading main memory
Number of chips
8
12
16
4
8
12
16
4
8
12
16
15