Tarmo TAR010 Instruction Manual page 90

DELIVERY JOURNAL
Action
Delivery service
1. Break the packaging and make sure the machine
has not been damaged in transport.
2. Where applicable, assemble accompanying
components.
3. Check that the machine design corresponds to
the customer order.
4. Check that the right amount of oil is in the engine
and transmission.
5. Check and adjust air pressure in the tires. (25 psi
max.)
6. Check that the working equipment is properly set.
7. Check that the drive pulleys and sprockets are
aligned.
8. Lubricate the machine as described in the
lubrication schedule.
9. Fill the fuel tank and start the engine.
10. Check that the machine and working equipment
do not move in neutral.
11. Check all operating instruments.
12. Check decals and information attached to the
unit.
13. Check the engine speed (RPM), see Technical
Data.
14. Check for leakage.
15. Inform the customer about:
- The need and advantages of following the
service schedule.
- The need and advantage of leaving the
machine for service every 300 hours.
- The effects of service and maintaining a service
journal on the machine's resale value.
16. Fill in the sales papers, etc.
date, stamp, signature