Table of Contents
Advertisement
Available languages
Available languages
CONTROLS
Fueling
Read the safety instructions before fueling.
Keep the fuel and fuel tank clean. Avoid filling the machine with dirty fuel. Make sure the fuel
cap is properly tightened and the gasket is not damaged, particularly before washing the
machine.
SAE10W-30 is recommended for general use.
If the engine "bolts" at normal load it can be damaged. Change the fuel. If this does not
help, contact an authorized service workshop.
Do not fill the tank completely; leave space for the fuel to expand as it warms up.
WARNING
GASOLINE
IS
OBSERVE CAUTION AND FILL THE TANK
OUTDOORS.
INSTRUCTIONS).
Centrifugal clutch
The engine is equipped with a centrifugal clutch that is connected to the crankshaft. When
the engine speed increases, the drive for cutting wheel engages automatically. The
centrifugal clutch is maintenance-face; it is not possible for the user to make adjustments.
Safety presence grip bar
The bar must be held against the handle for the engine to run. If you release the grip, the
ignition system short-circuits and the engine stops.
WARNING
DO NOT BIND THE BAR TO THE
HANDLE. IT IS THERE FOR YOUR
SAFETY.
HIGHLY
FLAMMABLE.
(SEE
THE
SAFETY
Advertisement
Table of Contents
