Table of Contents
Advertisement
Available languages
Available languages
Normal shutdown
Throttle
Set the throttle to SLOW/DISENGAGE.
If the engine has been running full out, let it
run easily for about 30 seconds to one
minute at low speed.
DO NOT let front of unit touch ground until
you are sure cutting wheel has stopped
turning
A
ROTATING CUTTING
DANGEROUS!
STAY
POSITION AND BE SURE THAT THE BLADE
COMES TO A COMPLETE STOP BEFORE DOING
ANYTHING ELSE.
Brake
Activate the brake by pulling the lever.
Fuel valve
Close the fuel valve. Turn the lever all the
way to the left (see illustration).
Release the safety presence bar. Wait until
the blade stops.
Make sure that the blade is resting against
the ground and has stopped completely
before doing anything.
WARNING
BLADE
IS VERY
AT
THE
OPERATING
Advertisement
Table of Contents
