Verkada AC41 Install Manual page 7

Installation
Mounting
1. Disconnect the mount
To remove the wall mount, unscrew the two
security torx screws from the inside.
2. Remove the mount
Once the security screws are fully removed, slide
the wall mount down and away from the main
enclosure.
3. Install the mount
Drill four 5/16" Ø holes into the wall. Insert the
drywall anchors into the holes. Fasten the mount
plate onto the wall by installing the mounting
screws into the wall anchors.
Verkada Inc. 405 E 4th Ave, San Mateo, CA, 94401
sales@verkada.com
All specifications are subject to change without notice.
Copyright © Verkada Inc . All rights reserved.