Parts Identification - HJM 825 Instructions Manual

Radiador Aceite Mini
37. The heater must not be located immediately below a socket-outlet.
38. This heater is filled with a precise quantity of special oil. Repairs requiring opening of the
oil container are only to be made by the manufacturer or his service agent who should
be contacted if there is an oil leak.
39. When scrapping the heater, follow the regulations concerning the disposal of oil.
40. The heater should not be used in a room, of which the floor area is less than 5 M2.
41. Use this heater only as described in this manual. Any other use not recommended by
the manufacturer may cause fire, electric shock, or injury to persons.

PARTS IDENTIFICATION

1
2
3
This model has two levels of over heat protection
1. Automatic thermal cut-off
Switches off the heater in the event of overheating or malfunction and resets once the tem-
perature drops to a normal level.
2. Thermal fuse
In the event that the automatic thermal cut-off fails to operate the heater has a further safety
device. This is a non-resettable switch which will require the unit be returned to an Approved
Service Agent for replecement.
If overheating or malfunctions continue, return the heater to an Approved Service Agent for
examination.
13/5/11 10:08 Página 13
- 13 -
6
1. Carry Handle
2. Thermostat Knob
3. Indicator Light
4. Front Feet
5. Rear Feet
5
6. Radiator Fins
4
E
N
G
L
I
S
H