ABB MDAR Instruction Manual page 42

I.L. 40-385.5
Information/Settings
Zone-2 phase unit
Zone-2 phase timer
Zone-2 ground unit
Zone-2 ground timer T
Zone-3 phase unit
Zone-3 phase timer
Zone-3 ground unit
Zone-3 ground timer
Zone-3 direction
Z1L impedance angle
ZOL impedance angle
ZOL/Z1L
Low voltage units
Low set phase o/c unit
Med set phase o/c unit
Low set ground o/c unit
Med set ground o/c unit
High set phase o/c unit
High set ground o/c unit
Out-of-step block zone-1
Out-of-step block zone-2
Out-of-step block pilot
OS & OS override timers
OSB inner blinder
OSB outer blinder
Directional ground units
Ground backup time curves
Ground backup setting
Ground backup time dial
Choice of directional or non-directional ground backup
CIF trip
LLT trip
LOP block
LOI block
Trip alarm seal-in
Remote setting
Real time clock
1) set year
2) set month
3) set day
4) set week day
5) set hour
6) set minute
* Optional, # use "OUT" for disabling this unit.
Note: When the CTYP is set at 1 ampere, the range of the following functions is as shown below:
7-4
Z1P/Z1G/Z2P/Z2G/Z3P/Z3G
and PLTP/PLTG
ITP/ITG
Display
Function
Field
Z2P # 0.01-50.00, 0.01 ohm steps
T2P 0.10-2.99,BLK,0.01sec.steps
Z2G # 0.01-50.00, 0.01 ohm steps
2G 0.10-2.99,BLK,0.01sec.steps
Z3P # 0.01-50.00, 0.01 ohm steps
T3P 0.10-9.99,BLK,0.01sec.steps
Z3G # 0.01-50.00, 0.01 ohm steps
T3G 0.10-9.99,BLK,0.01sec.steps
Z3FR FWD/REV
PANG 40-90, in 1.0 degree steps
GANG 4 0-90, in 1.0 degree steps
ZR 0.1-7.0, in 0.1 steps
LV 4 0-60, in 1.0 volt steps.
IL 0.5-10, in 0.1 amp steps
IM 0.5-10, in 0.1 amp steps
IOS 0.5-10, in 0.1 amp steps
IOM 0.5-10, in 0.1 amp steps
ITP # 2.0-150.0, 0.5 amp steps
ITG # 2.0-150,0, 0.5 amp steps
OSB1 YES/NO
OSB2 YES/NO
OSBP YES/NO
OSTM 500, 1000 ms
RT 1.00-15.00, 0.1 ohm steps
RU 3.00-15.00, 0.1 ohm steps
DIRU ZSEQ, NSEQ, DUAL
GBCV # CO-2,
CO-8,
GBPU 0.5-4.0, in 0.1 amp steps
GTC 1-63, in 1.0 steps
GDIR YES/NO
CIF YES/NO
LLT YES/FDOG/NO
LOPB YES/NO
LOIB YES/NO
AL2S YES/NO
SETR YES/NO
TIME YES/NO
YEAR 1980-2079,in 1 year steps
MNTH 1-12, in 1 month steps
DAY 1-31, in 1 day steps
WDAY SUN/MON/TUES/WEN/
THUR/FRI/SAT
HOUR 1-24, in 1 hour steps
MIN 1-60, in 1 minute steps
0.05-250.00, in 0.05 ohms steps
0.4-30.0, in 0.1 amp. steps
Value
Field (note 1)
CO-5, CO-6, CO-7,
CO-9 and CO-11.