ABB MDAR Instruction Manual page 30

I.L. 40-385.5
If jumper JMP5 on the processor module is set to IN position, the following ten
contacts can be selected for testing. Refer to Chapter VIII for more detailed
information.
7.4 16 FAULT RECORDS AND INTERMEDIATE TARGETS.
Refer to chapter 11 for detail.
7-8
TRIP RELY
BFI RELY
RI1 RELY
RI2 RELY
RB RELY
AL1 RELY
AL2 RELY
GS RELY
SEND RELY
STOP RELY