Sharp VT-3448X Service Manual page 27

Jig Item
No.
driver for reverse guide
Part No. Code
J i G D R i V E R - BM
Configuration
This Jig is used with the tension gauge.
Rotary transformer clearance adjusting
jig.
This screwdriver is used for adjusting
the guide roller height.
This is used to screw down resinmade
parts: the specified torque is 5kg.
This Jig is used for height adjustment of
the reverse guide (for reverse guide
height adjustment).
This Jig is used for height adjustment of
the reverse guide.
For X value adjustment
Remarks