Omron COMP A-I-R RE-C800KD Instruction Manual page 16

3.1 Starting Inhalation
6
Check the air tube. No condensation or moisture should remain in the air tube.
WARNING
• After cleaning, allow the parts to dry before reassembling. To avoid contamination, store the
device and parts in a clean and safe location.
If any condensation or moisture remains in the air tube, remove the moisture from the air tube.
Follow the directions below:
1. Make sure the air tube is still connected to the air tube connector of the main unit.
2. Press the power switch on. The main unit pumps air through the air tube to expel the moisture.
3. Press the power switch off.
7
Disconnect the air tube from the main unit.
Hold the air tube plug and gently pull the air tube plug off the air tube connector.
8
Unplug the AC adapter from the electrical outlet.
CAUTION
• When unplugging the AC adapter from the outlet, be sure to safely pull from the AC adapter.
DO NOT pull from the AC adapter cable.
• Unplug the AC adapter when not in use.
9
Disconnect the power plug from the main unit.
Securely hold and press the power plug down to disconnect the AC
adapter.
15
Main unit
Power plug