Table of Contents
Advertisement
Rev D
7. After connecting the cable, the seismometer will unlock and center the mass
automatically when power is applied. The unlocking procedure will take several seconds and
the mass centering procedure will take several minutes.
NOTE: The sensor will also wait up to two minutes before beginning the
unlock procedure in order to allow its internal super-capacitor to fully
charge up.
8. After the mass centering procedure is completed, the seismometer will enter working
mode and begin measuring ground motion.
9. Upon removal of power, the seismometer will automatically lock its masses.
Reftek Systems Inc.
REF TEK Colt™ Broadband Seismometer User Guide
117400-XX-UG
10/27/2021
15
Advertisement
Table of Contents
Need help?
Do you have a question about the REF TEK Colt and is the answer not in the manual?
Questions and answers