Installing The Software; Installing The Pcie-6593 Module Into Pcie Chassis - National Instruments PCIe-6593 Getting Started Manual

Installing the Software

You must be an Administrator to install NI software on your computer.
1. Install an ADE, such as LabVIEW or LabWindows
2. Download the driver software installer from ni.com/downloads.
NI Package Manager downloads with the driver software to handle the installation. Refer
to the NI Package Manager Manual
upgrading NI software using NI Package Manager.
3. Follow the instructions in the installation prompts.
Note
installation. Accept the prompts to complete the installation.
4. When the installer completes, select Restart in the dialog box that prompts you to restart,
shut down, or restart later.
Installing the PCIe-6593 Module into PCIe
Chassis
1. Power off and unplug the computer.
2. Access the computer system expansion slots. This step might require you to remove one
or more access panels on the computer case.
3. Locate a compatible slot and remove the corresponding slot cover on the computer back
panel.
4. Touch any metal part of the computer to discharge any static electricity.
5. Insert the module into the slot you selected. Gently rock the module into place without
forcing it.
4 | ni.com | PCIe-6593 Getting Started Guide
Windows users may see access and security messages during
™
/CVI
for more information about installing, removing, and
™
.