Balanced Body Arm Chair Assembling

Assembling the Balanced Body
Now that you have opened up the box for your new equipment, please take the time to thoroughly inspect if for shipping damage
prior to assembly. If any issues are found, contact our customer service department at 1-800-PILATES or 1-916-388-2838 right away.
Please read each step thoroughly and look at the diagrams before doing anything.
Parts:
(Please use this list to make sure you have all the parts listed. If you are missing
a part, please contact our customer service department at 1-800-PILATES or
1-916-388-2838.)
TOOLS
5/32" Allen Wrench
.
PARTS
Armchair
Wheel bracket (with wheels)
Armchair rod (with 2 eyebolt &
2 springs
Bracket, armchair rod
Spring, Yellow (with eyebolt)
Spring, Purple (with eyebolt)
Neoprene Handles
HARDWARE
Finish washer
Acorn nut, 1/4"
Button head bolt, 1/4"-20 x
1-1/2" long
Lock nut, 1/4"
Flat washer, 1/4"
tools Needed:
» 7/16" open end or crescent wrench
PART NUMBER QTY
GEN9282 1
.
615-002
230-025 1
616-155 1
SPR9002 (modified) 1
SPR9461 (modified) 1
101-016 1 pair
210-050 2
GEN9181 2
GEN9019 2
GEN9021 4
GEN9204 5
Arm Chair
®
1. Slide the rod with two springs attached through the holes in
the armchair as shown in Figure 1. Make sure the bolt holes
on the wood frame and metal bar are on the same side of the
chair once it slides into place.
Figure 1: View looking at the underside of the Arm Chair showing correct spring
rod placement. (springs omitted for clarity)
2. Make sure the loops of the eyebolts on the rod are pointed
toward the chair as in Figure 1. Using the included bolts,
washer, and nuts, install the rod bracket as shown in Figure 2.
Figure 2: View looking at the underside of the Arm Chair showing correct spring
rod placement.
3. Tighten both bolts installed in the previous step.
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | info@pilates.com
400-244 | 10.19.12