Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Dancover San Francisco
Summary of Contents for Dancover San Francisco
- Page 1 Manual Gazebo San Francisco 3x3,65m 09-04-2021...
-
Page 2: Safety Advice
Note: Marquees are intended for events and other arrangements and are as such only meant for short term temporary assembly and the following disassembly. Dancover warranty applies only to the normal use of the Product, normal wear and tear excepted, in accordance with written use instructions or manual. - Page 3 Part list for gazebo 3x3,65m...
- Page 4 M6*30...
- Page 6 STEP 3:Connect the Ionger Crossbeams Band B1 using Crossbeam Connector (Part P) Note: After sliding the Cro ssbeam Connector (Part P) into a crossbeam you should start one bolt to hold the Crossbeam Connector in place.
- Page 7 STEP 5-1 STEP 5-1: Attach the Corner Protectors (Part J1) and the Rib Supports (Part J2) Just twist the top two screws of (Part J2) STEP 5-2 STEP 5-2: Slide 5 Netting Hooks (Part Q) into Long Crossbeams (Parts B and B1).With the sections laying on their side, Slide 4 Netting Hooks (Part Q) into Short Crossbeams (Parts C and C1).
- Page 8 STEP 6 STEP 6: Assemble the Roof Frame by Attaching the Roof Ribs Long (Part E) to the Roof Top Brace (Part K1).
- Page 9 STEP 7 STEP 8...
- Page 10 STEP 9 Don't tighten all the screws, just hold the （ Part I and Part H） , until all of them are fixed Please note that Parts M3 are installed on Parts D, and Parts M4 are on Parts E. STEP 10 Tap lightly with the screwdriver...
- Page 11 STEP 11 Step11 - 1 ：Install the Roof Plates （Part N5 and N6) on the Long Sides of the Gazebo. Install the Roof Plates （Part O5) on the Short Sides of the Gazebo. Tighten the screw (part U) halfwy,then install(Part G5 G6), and finally tighten the (Part U) tep11 G5/G6...
- Page 12 STEP 12 Step 12: Part N1 N2 N3 N4 for the Long Sides of the Gazebo, Part O1 O2 O3 O4 for the short Sides of the Gazebo. Install the Roof Plates on the Long Sides of the Gazebo. Start by sliding Roof Plate 1 (Part N2 and N3) into position.
- Page 13 STEP 14 Note: First fix 4 (Part M2) with V, but do not screw too tight, then install (Part G1 G2 G3 and G4 )as shown in the diagram. You'd better from left to right. Attach the Center Rib Braces (PartM1) as shown in the diagram.
- Page 14 STEP 15 Gently insert Z2, Z3, Z4 from left to right as shown, then tighten them via screws U1 and V.
- Page 15 STEP 16...
- Page 16 Head office: Dancover A/S For more information Lyngevej 16A, Nørre Herlev please visit: 3400 Hillerød www.dancovershop.com Denmark...
Need help?
Do you have a question about the San Francisco and is the answer not in the manual?
Questions and answers