Care, Maintenance & Troubleshooting Guide - Progressive RUN2000 Owner's Manual And Safety Instructions

DISPLAY FUNCTIONS:
TIME: Displays your elapsed workout time in minutes and seconds. Press the START button on the computer to
begin exercising, the LCD window will countdown 3 seconds the LCD showing "3-2-1" before the running belt
starts moving. The running belt starts moving with an initial speed of 0.8 KPH. You may press the SPEED + or
SPEED - button on the computer console or handlebar to increase or decrease the running speed during exercise.
Time starts counting up from 0:00 to 99:59 per 1 second increment.
SPEED: Displays the current speed from the minimum 1.0 KPH to the maximum 10.0 You may increase or decrease
the speed by pressing the SPEED + or SPEED - on the computer console or handlebar.
DISTANCE: Displays the accumulative distance travelled during workout. Press the START button on the computer
to begin exercising, the LCD window will countdown 3 seconds with the LCD showing "3-2-1" before the running
belt starts moving. The running belt starts moving with an initial speed of 1.0 KPH. You may press the SPEED + or
SPEED - button on the computer console or handlebar to increase or decrease the running speed during exercise.
Distance starts counting up.
CALORIES: Displays the total calories burned during your workout. Press the START button on the computer to
begin exercising, the LCD window will countdown 3 seconds the LCD showing "3-2-1" before the running belt
starts moving. The running belt starts moving with an initial speed of 0.8 KPH. You may press the SPEED + or
SPEED button on the computer console or handlebar to increase or decrease the running speed during exercise.
Calorie starts counting up. (This data is a rough guide for comparison of di erent exercise sessions and should
not be used in medical treatment).
PULSE: Displays your current heart rate in beats per minute (BPM). To activate, grip the hand pulse sensors during
exercise and the pulse will display after 2-5 seconds. For a more accurate reading, grip pulse sensors with
both hands.
CARE, MAINTENANCE & TROUBLESHOOTING GUIDE
WARNING: To prevent electrical shock, please turn o and unplug the treadmill before
cleaning or performing routine maintenance.
WARNING: Always check the wear and tear components like spring knob and running belt to prevent injury.
CLEANING
After each exercise, ensure that the unit is wiped down and any sweat is removed from the unit.
The treadmill can be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents. Be careful not
to get excessive moisture on the display panel as this might damage the unit and create an electrical hazard.
Please keep the treadmill, especially the computer console, out of direct sunlight to prevent damage to the screen.
STORAGE
Store the treadmill in a clean and dry indoor environment. Never leave or use the unit outdoors. Ensure the master
power switch is o and the power cord is un-plugged from wall outlet.
23