Lifting Up The Treadmill - Progressive RUN2000 Owner's Manual And Safety Instructions

Step 2
A.Remove the four Head Hex Socket Screws (17) in the end of the Left Stand Tube and Right Stand Tube.
B.Attach the Handlebar (70) onto both ends of the Stand Tube, tighten the screws with the Allen Key
provided.
C. Connect the wire that comes from the Computer Console (5) to the Main Control Cable Socket from the right
handlebar support of the Right Stand Tube .
D.Install both Handlebar Covers (16) onto the Handlebar (70).
Step 3
84
A.Turn the Computer Console (5) up or down to align the Socket Head Screw hole.
B. Lock the Computer Console (5) in place by tightening the Socket Head Screw (9).
C. Fully tighten the Screw(28) to keep the stand tube xed well.

LIFTING UP THE TREADMILL

Firmly grasp the rear end of the main frame with both hands. Carefully lift the end of the main frame up into the
upright position until the Foot Lock Latch engages and securely locks the main frame into position. Make sure the
main frame is securely latched before moving the treadmill. See gures A and B.
Store the treadmill in a clean and dry environment away from children.
CAUTION: Failure to secure the main frame with the foot lock latch may cause the treadmill accidental fall and
cause bodily injury.
19