Setting Down The Treadmill; Incline Adjustment - Progressive RUN2000 Owner's Manual And Safety Instructions

SETTING DOWN THE TREADMILL

Foot Lock
To set down the treadmill, rmly grasp the back end of the treadmill with both hands. Gently kick on the Foot
Lock Latch with your foot until the lock latch disengages. Carefully lower the main frame to the ground.
See gures A and B.
WARNING: Do not stand under the main frame when setting down the treadmill.
To prevent injury please make sure you have a rm hold when lifting up or setting down the main frame.

INCLINE ADJUSTMENT

Incline Adjuster
Lock Pin
There are 3 incline angles that the Incline Adjuster can be set to. Place one hand on the rear end of the main frame,
then lift the rear end of the main frame up and use the other hand to remove the Lock Pin. Adjust the Incline
Adjuster to the desired position and insert the Lock Pin into the holes on the main frame and Incline Adjuster to
lock the Incline Adjuster in place.
NOTE: Make sure when adjusting the incline angle of the Incline Adjuster that both Incline Adjusters should be
adjusted to the same angle. Using the Incline Adjusters at di erent angles can cause the treadmill to be unstable
and cause injury.
20