Access Email And Data Services On Gsm/Umts Networks; Access Email And Data Services On Cdma Networks; Status Messages - Samsung SPH-M930 User Manual

Once your services are activated, you may need to select a GSM data services provider for the
country you are in.

Access Email and Data Services on GSM/UMTS Networks

To access your email and browse the Web when travelling, you may need to manually select
the carrier that provides Sprint service in your location. You can find a list of carriers for each
country where GSM data service is offered at sprint.com/sww.

Access Email and Data Services on CDMA Networks

If data service is available on a CDMA network, then you only need to set the phone to CDMA;
you will not need to select the specific carrier. Selecting a specific carrier is only necessary for
providers on the GSM network. If your device has automatically selected a GSM network while
traveling, then you will need to set the phone to CDMA to access CDMA data services. (See
Enable Global Roaming
country.

Status Messages

You may receive status messages under certain conditions. Before contacting Sprint Worldwide
Customer Support, note the message, numeric code, and the conditions under which it
appeared. The following table lists and describes the status messages.
Status Messages
Number Not in Service
User Not Available
User Not Authorized
Please Try Later
Service Restricted
Service Not Available
Emergency Calls Only
System Busy. Try Later
Service Conflict
Please Try Again
Self Check Error
Self Check Fail
Sprint Worldwide Wireless Service
Mode.) Visit sprint.com/sww
Message Description
The number that you entered is not valid.
The phone that you called is either busy, out-of-range, or
turned off. Please try again later.
The phone that you called is either busy, out-of-range, or
turned off. Please try again later.
This service is temporarily not available. Please try again later.
Service may not be activated properly. Please contact Sprint
Customer Service to report the issue for resolution.
This feature is not available on the current network.
Either the service is not activated properly or the current
network is available for emergency calling only. Adjust your
network settings to check for other available networks. If
service is still not available after adjusting the settings, contact
Sprint Customer Service to report the issue for resolution
The system is experiencing heavy traffic. Please try again later.
This service cannot be enabled because an incompatible
service has already been turned on.
An error occurred. Note the error code and try again.
A fault was detected with your phone. If this error recurs, note
the error and contact Sprint Customer Service.
An operational fault was detected with your phone. Note the
for a list of services available in each
151