In-Call Options - Samsung Intercept SPH-M910 User Manual

Speaker On to activate speakerphone mode. (If you are in
•
speakerphone mode, the option is displayed as Speaker
Off to deactivate.)
Dialpad/Hide dialpad to show or hide the onscreen
•
dialpad.
End call to end the current call.
•
To exit Emergency mode:
Press or tap
1.
Tap Exit on the Emergency Call Back mode.
2.
Note: When you end the 911 call, you are returned to the
Emergency Call Back mode. Within the Emergency Call
Back mode, tap OK or press the Home key to use another
menu.
Enhanced 911 (E911) Information
This device features an embedded Global Positioning
System (GPS) chip necessary for utilizing E911
emergency location services where available.
When you place an emergency 911 call, the GPS
feature of your device seeks information to calculate
your approximate location.
Note: Depending on several variables, including availability and
access to satellite signals, it may take up to 30 seconds
or more to determine and report your approximate
location.
Important!: Always report your location to the 911 operator when
placing an emergency call. Some designated
emergency call takers, known as Public Safety
Answering Points (PSAPs) may not be equipped to
receive GPS location information from your device.
36
to end a 911 call.
End call End call

In-Call Options

Once you initiate a call,
•
you will see six onscreen
options. To select an
option, tap the
corresponding option.
Dialpad/Hide to toggle
the appearance of the
onscreen dialpad.
End call to end the
•
current call.
Speaker to route the
•
device's audio through
the speaker (On) or
through the earpiece
(Off).
Speaker to route the device's audio through the
– Activate
speaker. (You can adjust the speaker volume using the
volume keys.)
Speaker to use the device's earpiece.
– Deactivate
Warning!: Because of higher volume levels, do not place the
device near your ear during speakerphone use.
Mute to mute the microphone during an active call. Tap
•
again to unmute the microphone.
Note: If Mute is activated, the speaker mode is deactivated.
Bluetooth to route the device's audio through the
•
connected Bluetooth headset (On) or through the speaker
(Off). See "Turning Bluetooth On and Off" on page 81.