Silence All - Samsung Intercept SPH-M910 User Manual

Activation of Feature Sounds
When tapping onscreen items, using the dialpad, or
SD card notifications, you can enable whether an
audible sound plays for those features.
Press
1.
display.
Tap Audible touch tones, Audible selection, SD
2.
card notifications to activate the feature.
• Audible touch tones plays a tone while using the
dialpad.
• Audible selection plays a sound when making any
onscreen selection.
• SD card notifications plays a sound when an SD card
notification event occurs.
Adjusting the Volume Settings
Adjust the volume settings of both the device and
Media playback to suit your needs and your
environment.
Press
1.
display.
Tap either Ringer volume, Media volume or
2.
System volume.
Touch and drag the onscreen slider, adjust the
3.
volume level, and tap OK.
• Within Ringer volume, adjust the Incoming call
volume and Notification volume fields to assign the
volume settings.
and tap Sound &
and tap Sound &
Tip: You can adjust the ringtone volume in standby mode (or
the earpiece volume during a call) by using the volume
button on the left side of your device.
Vibrate
To set your device to vibrate for incoming calls and
silent for notifications:
Press the volume button down in standby mode
until you see on the screen.
To set your device to always vibrate for incoming
calls:
Press
1.
display.
Tap Phone vibrate. (If you have already checked
2.
the option, tapping it again deselects the
option.)
To set your device to vibrate while using the dialpad:
Press
1.
display.
Tap Haptic feedback. (If you have already
2.
checked the option, tapping it again deselects
the option.)

Silence All

The Silence All option allows you to mute all sounds
without turning your device off (except for Media
volume).
and tap Sound &
and tap Sound &
Settings 103