Ashford SampleIt Loom Stand Variable Width Instructions

For 25cm (10") and 40cm (16") looms

Download this manual

SampleIt Loom Stand Variable Width

Ashford Handicrafts Limited

415 West Street, P O Box 474, Ashburton, New Zealand

+64 3 308 9087

sales@ashford.co.nz

www.ashford.co.nz

For 25cm (10") and 40cm (16") Looms

Ashford Guarantee

Thank you for purchasing this Ashford product. In the unlikely event there is

any fault in manufacture please contact the Ashford Dealer who supplied it. To

validate our guarantee please visit our website -support - product registration,

or email us.

SLSV030820

Need help?

Do you have a question about the SampleIt Loom Stand Variable Width and is the answer not in the manual?

Page 1 Ashford Guarantee 415 West Street, P O Box 474, Ashburton, New Zealand Thank you for purchasing this Ashford product. In the unlikely event there is +64 3 308 9087 any fault in manufacture please contact the Ashford Dealer who supplied it. To sales@ashford.co.nz...
Page 2 Then locate the loom and bolts into the slots in the legs and secure with washers and knobs. Knob Washer 40mm(1½”) bolt Foot Foot Footrest Foot Barrel nut 50mm (2”) bolt Footrest Ashford Handicrafts Limited 415 West Street, P O Box 474, Ashburton, New Zealand +64 3 308 9087 sales@ashford.co.nz www.ashford.co.nz...