Ashford SampleIt Loom Stand Instructions

For the sampleit loom 25cm (10ins) and 40cm (16ins)

For the SampleIt Loom 25cm (10ins) and 40cm (16ins)

Ashford Handicrafts Limited

Factory and Showroom: 415 West Street

PO Box 474, Ashburton, 7700 New Zealand

Telephone +64 3 308 9087

sales@ashford.co.nz www.ashford.co.nz

INSTRUCTIONS

SampleIt Loom Stand

Ashford Guarantee

Thank you for purchasing this Ashford product. In the unlikely event there is

any fault in manufacture we will replace the item. To validate our guarantee

please visit our website or write to us.

SL25LS130918V2

Table of Contents

Need help?

Do you have a question about the SampleIt Loom Stand and is the answer not in the manual?

Page 1 Ashford Guarantee Factory and Showroom: 415 West Street Thank you for purchasing this Ashford product. In the unlikely event there is PO Box 474, Ashburton, 7700 New Zealand any fault in manufacture we will replace the item. To validate our guarantee Telephone +64 3 308 9087 please visit our website or write to us.
Page 2 ASSEMBLY INSTRUCTIONS 1. Attach the base rail (with the Ashford logo) 3. Push the 2 bolts through the holes in the side to one side and one foot and secure with a of the SampleIt loom. Locate the bolts into the small washer and knob.