Step 5
You will need
2 x Washers M8
2 x Bolts 25mm
(H4)
(H5)
Attach the support legs (P8) to the centre rail (P7) using 2 x Bolts (H5), 2 x Washers (H4)
as shown.
Step 6
You will need
4 x Washers M8
4 x Bolts 25mm
(H4)
(H5)
Phillips head
Screwdriver
Adjust to be 10mm gap from floor
to the bottom of support legs.
Slot the centre raill (P7) into the headboard (P1) and footboard (P3)
Rotate bolts (H5) by using phillips head screwdriver (not provided) to the headboard (P1)
and footboard (P3). No need to tighten bolts until step 8 .
fantasticfurniture.com.au
Phillips head
Screwdriver
(P1)
(P7)
(P4)
(P7)
(P4)
(H5)
(H4)
(P8)
(H4)
(H5)
(P7)
(P3)
Page 7