Fitting Cnc Stylus; Setting Z Datum - Yeti CNC Stylus Quick Start Manual

CNC STYLUS – QUICK START GUIDE V1.1

4 Fitting CNC stylus

CNC Stylus has a standardised 43mm boss which is compatible with a wide range of CNC
machines. The CNC Stylus should be clamped securely around the boss.

5 Setting Z datum

The CNC Stylus features a constant pressure system, using gravity. This ensures the
chosen tool maintains an even contact with the material surface, irrespective of any
deviation in flatness.
This feature is achieved by allowing the barrel to move freely inside the boss. As built,
travel is 4mm.
Yeti Tool Ltd | Unit 12 Old Mill Road | Portishead | Bristol | BS20 7BX
8