Table of Contents
Advertisement
CNC STYLUS – QUICK START GUIDE V1.1
Please see the quick look up table in the collet sizes section – Page 6.
Once you have selected the correct size collet, fit the collet to the collet nut. You can now
insert your chosen tool into the stylus and tighten the collet nut. We would recommend
clamping onto the tool as close to the tip as possible.
6.4 CAM
6.4.1 Toolpaths
You must use your CAM software to create a toolpath for your design. You can use several
different toolpaths including profile, pocket and engrave.
To find out more about creating toolpaths with Vectric VCarve Pro please see Section 8.2
Knowledgebase, page 17.
6.4.2 Retract height
You will need to set the retract height to reflect the amount of travel set in Section 5,
page 8.
Yeti Tool Ltd | Unit 12 Old Mill Road | Portishead | Bristol | BS20 7BX
11
Advertisement
Table of Contents
