Related Manuals for SANUS VuePoint F215B
Summary of Contents for SANUS VuePoint F215B
- Page 1 F215b INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-888-333-9952. We’re ready to help! Scan for easy install video san.us/246...
-
Page 2: Before You Begin
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE Before You Begin Please check the following items: Your TV and any accessories you plan to use do not exceed the specifi ed weight limit. The hole pattern on the back of your TV is compatible with the hole pattern of the TV bracket(s). -
Page 3: Weight Limit
Weight Limit Tools Needed 60 lb (27 kg) DO NOT EXCEED! (includes TV and any accessories) 5.5 mm 10 mm (7/32 in.) (3/8 in.) 13 mm (1/2 in.) - Page 4 Dimensions UP TO 15.75 15° 15° 400.0 [mm] 16.54 15.94 420.0 405.0 7.76 197.1 4.54 115.3 3.00 76.1 17.91 12.19 455.0 309.5...
-
Page 5: Supplied Parts And Hardware
Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;... - Page 6 Parts and Hardware for STEP 1 Cont. Washers Spacers M4/M5 M6/M8 Horizontal TV Interface Brackets Horizontal Bracket Screws 8-32 x 9⁄16 in.
- Page 7 Parts and Hardware for STEP 2 Parts and Hardware for STEP 3 Screw Washer Wall Plate/Arm Assembly Wall Plate Template 8-32 x 3⁄8 in. 8-32 in. Additional Hardware Washers Lag Bolts 5⁄16 2 3⁄ 4 5⁄16 3/16 in. 5/32 in. Concrete Anchors 5/32 in.
- Page 8 STEP 1 Select TV Hardware and Attach Interface Brackets to TV Hand thread screws into the threaded inserts on the back of your TV to determine the correct screw diameter (M4, M5, M6, or M8). Determine what kind of TV you have and if you require extra space between the wall and the TV to accommodate cables. •...
- Page 9 STEP 1-A 01 02 Ensure brackets are level on the back of the TV. If you need extra space to accommodate cables, recesses, or protrusions; use spacers (see the irregular back option on the next page). 04 05 06...
- Page 10 STEP 1-B 01 02 Ensure brackets are level on the back of the TV. Standard confi gurations are shown. For special applications, or if you are unsure about your hardware selection, contact Customer Service. 11 12 07 08 09 10...
- Page 11 STEP 1 Cont. 14 15 Ensure horizontal brackets are centered and scews are securely fastened.
- Page 12 STEP 2 Attach Wall Plate to Wall - Wood Stud Option Locate your stud(s). Verify the center of the stud using an awl, a thin nail, or an edge to edge stud finder. CAUTION: Avoid potential personal injuries and property damage! ●...
- Page 13 STEP 2 Drill pilot holes. IMPORTANT: Pilot holes must be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit. Tighten the lag bolts only until the washers are pulled firmly against the wall plate CAUTION: Improper use could reduce the holding power of the lag bolt.
- Page 14 STEP 2 Attach Wall Plate to Wall - Solid Concrete or Concrete Block Option Level the wall plate template and mark the hole locations. CAUTION: Avoid potential personal injuries and property damage! ● Mount the wall plate directly onto the concrete surface ●...
- Page 15 STEP 2 Insert anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Tighten the lag bolts only until the washers are pulled firmly against the wall plate CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
- Page 16 STEP 3 Attach TV to Wall Plate/Arm Assembly HEAVY! You may need assistance with this step. IMPORTANT: To prevent the TV from separating away from the arm assembly/wall plate , install the washer and screw securely.
-
Page 17: Manage Cables
STEP 4 Manage Cables NOTE: Leave enough slack in the cables to allow the TV to move freely. -
Page 18: Troubleshooting
Troubleshooting ADJUSTING TENSIONS REMOVING THE TV SWIVEL If you need to remove your TV from the arm assembly/ wall plate, disconnect all 5/32 in. cables and then reverse the procedures in STEP 3. 3/16 in. EXTEND/RETRACT TILT Loosen the knob on to adjust the tilt of your TV. -
Page 20: Antes De Comenzar
ESPAÑOL INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSÉRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. Antes de comenzar Cerciórese de: que su televisor y los accesorios que planifi ca usar no excedan el límite de peso especifi cado; que el patrón de orifi cios de la parte trasera de su televisor sea compatible con el patrón de orifi cios de la(s) placa(s) de sujeción para el televisor;... - Page 21 ESPAÑOL Piezas y elementos de sujeción suministrados ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;...
- Page 22 ESPAÑOL PASO 1 Cont. 14 15 Verifi que que las placas de sujeción horizontales estén centradas y que los tornillos estén bien ajustados. PASO 2 Fijar la placa mural a la pared - Opción para montantes de madera Localice el o los montantes. Verifi que el centro del montante con un punzón o un clavo delgado, o bien utilice un detector de bordes de montantes. PRECAUCIÓN: Evite posibles lesiones personales y daños materiales.
-
Page 23: Resolución De Problemas
ESPAÑOL Inserte los anclajes PRECAUCIÓN: Cerciórese de que los anclajes hayan quedado nivelados respecto de la superfi cie de hormigón. Ajuste los tornillos tirafondo solamente hasta que las arandelas queden fi rmes contra la placa mural PRECAUCIÓN: El uso indebido podría reducir la capacidad de retención de los tornillos tirafondo. NO ajuste en exceso los tornillos tirafondo. PASO 3 Instalar el televisor en el brazo/placa mural ¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso. - Page 24 Thank you for choosing Sanus VuePoint! Please take a moment to let us know how we did: Call us: 888-333-9952 Email us: info@sanus.com Leave a review: vuepoint.sanus.com UK: 0800 056 2853 Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.