Related Manuals for x-sense XS03
Summary of Contents for x-sense XS03
- Page 1 Photoelectric Somke Alarm User Manual Model: XS03 X-Sense Innovations Co., Ltd. F.1.05.XS0305 Email: support@x-sense.com...
- Page 2 This user manual contains important information regarding the operation of your X-Sense smoke alarm. Ensure you read this user manual fully before installing and operating the alarm. If you are installing this smoke alarm for use by others, you must leave this manual (or a copy of it) with the end user.
-
Page 3: Package Contents
Safety Information Low Battery & Malfunction Warning This alarm provides a full audible-visual warning when the battery is low or if there IMPORTANT is any malfunction. 1. DANGERS, WARNINGS, AND CAUTIONS ALERT YOU TO IMPORTANT The alarm beeps once and the red LED indicator fl ashes every 60 seconds when OPERATING INSTRUCTIONS OR TO POTENTIALLY HAZARDOUS SITUATIONS. -
Page 4: Installation Positioning
Installation Positioning NOTE: If a smoke alarm is installed in a kitchen, ensure it has an accessible silence button, and install it as far away from the stove and sink as possible to avoid false alarms. 1. Prioritize the installation of a smoke alarm in the bedroom and walkways, and make sure you can hear the alarm from all sleeping areas. -
Page 5: Installation Method
WARNING 1. THIS ALARM SHOULD BE INSTALLED BY A COMPETENT PERSON. 2. ALARMS SHOULD NOT BE USED AS A SUBSTITUTE FOR PROPER INSTALLATION, USE AND MAINTENANCE OF FUEL BURNING APPLIANCES INCLUDING APPROPRIATE VENTILATION AND EXHAUST SYSTEMS. 3. TO PREVENT INJURY, THIS DEVICE SHOULD BE SECURELY ATTACHED TO THE CEILING OR WALL IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS. -
Page 6: Alarm Test
Alarm Test The alarm must be properly attached to the mounting bracket before it can be tested. 1. Press the test button. 2. The unit beeps 3 times. 3. The red LED will fl ash once every second during the audible signal. 4. -
Page 7: Technical Speci Cations
1. Verify the unit’s alarm sound and indicator are working properly by testing the Malfunction Red LED flashes twice 2 beeps every 40 seconds unit once a week. every 40 seconds. 2. As a minimum your smoke alarm should be cleaned once every 3 months: Technical Speci cations Remove the unit from the ceiling and clean the alarm cover and vents with your vacuum cleaner fi... -
Page 8: Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with Local Authority or retailer for recycling advice. Manufacturer and Service Information X-Sense Innovations Co., Ltd. Address: B4-503, Kexing Science Park, 15 Keyuan Road, Shenzhen, 518057, CHINA Email: support@x-sense.com...
Need help?
Do you have a question about the XS03 and is the answer not in the manual?
Questions and answers